Speco Technologies DVR-16TT - Manual (Page 25)

User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/06
24
3.4 Entering OSD Setup Menu
The OSD Main menu contains a list of items that are used to configure the
DVR-4TN/ DVR-8TN/ DVR-16TN series. To enter the Main menu, correct
Administrator or User password is required.
Three sets passwords are offered for different Administrators and Users--if
there is more than one.
To enter OSD Main menu, press MENU and then enter either Administrator or
User password. The Password Verification screen will then display as follows.
Password Verification
________
Press Channel Keys To Enter Password
(4-8 Digits)
Press ◄ Key To Delete
NOTE:
If entering wrong password for 3 times, the system will be
locked out, and you will not be able to enter OSD menu within 2
minutes.
The default passwords are shown in the following table. The same passwords
are used for entering the remote viewing software SpecoRemote
TM .
Administrator Passwords User Passwords
1234 4321
It is strongly recommended that you change the passwords to prevent
unauthorized access to the unit.
After entering the correct password, the Main menu is displayed.
Main Menu
1. System Setup
2. Monitor Setup
3. Camera Setup
4. Record Setup
5. Sequence Setup
6. Event Setup
7. Database Setup
8. Configuration
9. Video Export
10. Shutdown