Speco Technologies DVR-16TT - Manual (Page 26)

User’s Manual
DVR-4TN/8TN/16TN/ 16TS/16TT Series
SPECO TECHNOLOGIES 01/06 25
Move the cursor up / down over the OSD items using the Direction keys and
press ENTER to enter the selected sub-menu.
3.5 System Date / Time Setting
The user can set the current date, time and other OSD parameters in the
Date/Time menu. The administrator’s privileges are required for entering the
submenu. In the OSD Main menu, select <System Setup> and press ENTER,
then select <Date/Time> to access the Date/Time menu; the menu displays
as follows.
Date/Time
1. Date
2. Time
3. Date/Time Display
4. Date Display Mode
5. Time Display Mode
6. Date/Time Order
7. Daylight Saving Time
8. DST Start
9. DST End
10. DST Bias
2005/02/21
PM10:39:26
1 Row
Y/M/D
24 HR
Date First
OFF
Apr, 1st Sun, 02:00
Apr, Last Sun, 02:00
60 Min
3.5.1 Set Date / Time
Set Date / Time
Select <Date> / <Time> and press ENTER to adjust the settings. LEFT /
RIGHT keys are used to move the cursor to previous or next field, ENTER is
for selecting, and UP / DOWN are used to change the value in the selected
field.
NOTE:
The reset date / time setting applies for recording new video,
the date and time of previously recorded video will not be changed.
NOTE:
To avoid record database corruption, after changing the date /
time setting, it is recommended to clear the database.
Date / Time Display
Users are allowed to choose to set the date / time OSD displays in 1 or 2 rows.
Use the UP / DOWN keys to change the setting. The default is to display the
date / time OSD in one row.