Speco Technologies DVR-16TT - Manual (Page 36)

User’s Manual
DVR-4TN/8TN/16TN/ 16TS/16TT Series
SPECO TECHNOLOGIES 01/06 35
Follow the steps below to control the call monitor.
• Press the CALL key on the front panel to enter call monitor control mode,
the message “Call Mode” will then be shown on the bottom-left of the
screen.
Press 1-8 Key To Select Channel
Press SEQ To Enable Sequence
Call Mode
• Press CHANNEL key to display the associated camera on the call monitor.
• Alternatively, press SEQ repeatedly to display the sequence of cameras
previously programmed in Call Monitor Schedule menu.
• Press ESC to return to the front panel to the Main monitor control mode.
4.3 Searching Recorded Video
The DVR-4TN/8TN/16TN/16TS/16TT series is capable of searching and
playing back recorded video by date and time or events. By entering the
specific date and time of the desired video, the unit will then search for the
matched video and play it on the monitor. Alternatively, a user can search
event video by selecting the channel as well.
In live or playback mode, press SEARCH to enter the Search menu, which is
shown as follows.
Search
----------Search By Time----------
From:
End:
Start Time: 2005/01/01 00:00:00
2005/05/01 00:00:00
2005/01/01 00:00:00
Begin Playback
----------Search By Event----------
Select Channel: CH1 CH2 CH3 CH4
Event List