Sony SNC-CS50N - Manual (Page 31)

A
d
mini
s
tra
ting
t
he
Came
ra
Setting the Camera Image and Audio — Camera Menu
31
• The frame rate lowers half when Stabilizer is set to
On.
• The stabilizer may not be effective depending on the
degree of oscillation.
Microphone
Select whether you are going to send the audio from the
m
microphone input connector. Select On to send the
audio from this network camera.
Note
When you change the Microphone setting, click
Refresh on the browser to reflect the change when
opening the main viewer page.
Mic volume
Set the volume level of the audio input from the m
microphone input connector. It is adjustable from –10 to
+10.
Audio codec
Select the bit rate when you send the audio from the m
microphone input connector. G.711 (64kbps), G.726
(40kbps), G.726 (32kbps), G.726 (24kbps) or G.726
(16kbps) can be selected.
Notes
• If the bit rate is set to other than G.711(64kbps), no
audio is output when you use the Java applet viewer.
• When MPEG4 is selected for Codec in the Alarm
buffer menu, no audio is output when you use Java
applet viewer.
Audio upload
Using the SNC audio upload tool stored in the supplied
CD-ROM, you can output the audio that is input to the
computer’s audio input terminal from the speaker
connected to the line output jack of the camera.
Select Enable to output the audio from the speaker.
Reset camera menu
Click Reset, and the message “Camera menu setting is
reset to default. Are you sure?” is displayed. To reset to
default, click OK.
OK/Cancel
See “Buttons common to every menu” on page 26.
Picture Tab
You can set the color condition, exposure, etc. of the
camera.
White balance
Select the white balance mode.
ATW-PRO: Automatically adjusts the color to be
closest to the image you are viewing. (approximately
3000 K to 7500 K)
One push WB: The One push trigger button becomes
active. Click the button to adjust the white balance
instantly.
ATW: Makes the subject lighter and automatically
adjusts to re-create the original color. (approximately
2200 K to 10000 K)
Exposure
Select the exposure of the camera.
The setting items required for the selected mode become
active.
Auto-iris lens: Select when an auto-iris lens is used.
When this option is selected, Auto gain control,
Backlight compensation, Lens adjustment and
Shutter speed become active.
Manual-iris lens 1: Select when a manual-iris lens or a
fixed-iris lens is used and the exposure is adjusted
with the electron shutter and AGC (Auto Gain
Control). When this option is selected, Auto gain
control, Backlight compensation, Shutter mode
and Exposure compensation become active.
Manual-iris lens 2: Select when a manual-iris lens or a
fixed-iris lens is used and the electron shutter and
sensitivity are adjusted manually. When this option is
selected, Shutter speed and Gain become active.
Auto gain control
When you select ON, the sensitivity is automatically
adjusted according to the brightness of the object.