SMC Networks SMC EZ Card 1000 SMC9452TX - Manual (Page 26)

I
NSTALLING AND
C
ONFIGURING
N
ETWORK
D
RIVERS
2-4
Further Configuration
You can modify card settings, install additional protocols and other
network components via the Windows NT “Network” applet.
1. Double-click on the “My Computer,” “Control Panel,” and
“Network” icons. The “Network” dialog box appears. Select the
“Protocols” tab. If the correct network protocols are not listed
in the list box, click on the “Add” button and follow the
on-screen directions to select network protocols.
2. Click on the appropriate tab, “Identification,” “Services” or
“Bindings,” to add or modify other network components, as
needed.
3. To modify other network card properties, click on the
“Adapters” tab and select the EZ Card 1000 in the list box. Then
click on the “Properties” button to run the card’s configuration
utility. Refer to Chapter 3 for a description of the card’s
configuration utility and its options.