SUPER MICRO Computer AS1020S-8 - Manual (Page 81)

Chapter 7: BIOS
7-11
Clear Event Log
This setting will clear all event logs when set to "OK". The options are OK and
Cancel.
Event Log Statistics
Highlight this item and press <Enter> to view details on the count of total unread
events.
Hyper Transport Confi guration
CPU0: CPU1 HT Link Speed
The HT link will run at the speed specifi ed in this setting if it is slower than or
equal to the system clock and if the board is capable. Options are Auto, 200
MHz, 400 MHz, 600 MHz, 800 MHz and 1 GHz.
CPU0: CPU1 HT Link Width
The HT link will run at the width specifi ed in this setting. Options are Auto, 2
bit, 4 bit, 8 bit and 16 bit.
CPU0: HT2000 HT Link Speed
The HT link will run at the speed specifi ed in this setting if it is slower than or
equal to the system clock and if the board is capable. Options are Auto, 200
MHz, 400 MHz, 600 MHz, 800 MHz and 1 GHz.
CPU0: HT2000 HT Link Width
The HT link will run at the width specifi ed in this setting. Options are Auto, 2
bit, 4 bit, 8 bit and 16 bit.
HT2000: HT1000 HT Link Speed
The HT link will run at the speed specifi ed in this setting if it is slower than or
equal to the system clock and if the board is capable. Options are Auto, 200
MHz, 400 MHz, 600 MHz and 800 MHz.
HT2000: HT1000 HT Link Width
The HT link will run at the width specifi ed in this setting. Options are Auto, 2
bit, 4 bit and 8 bit.