Sony KDP 51WS655 - Manual (Page 45)

44
SETU
P
SETU
P
S
E
TU
P
SETU
P
Set
up
SETU
P
Adjusting the Convergence Automatically (Flash Focus)
The projection tube image appears on the screen in three colors (red,
green and blue). If the three colors do not project properly, the color is
poor and the picture blurs. Before you use your TV, be sure to run the
Flash Focus feature. Flash Focus adjusts the color projection settings
automatically.
1 Tune to a TV or cable TV program.
2 Press the FLASH FOCUS button on the front panel of the TV (see
page 14).
The cross pattern appears and Flash Focus begins to work.
The adjustment is completed when the TV picture returns.
To Perform Additional Fine Manual Adjustments
Use the manual Convergence feature, described on page 45.
✍
Allow the TV to warm up for about 30 minutes before you adjust the
convergence with Flash Focus.
You can also access Flash
Focus in the Setup Menu. For
details, see page 95.
z
,
Notes on Flash Focus
❑ You cannot perform any other functions until Flash Focus has completed its cycle. If you
perform any other operation while Flash Focus is in progress, the Flash Focus operation is
canceled.
AX1X_Digital.book Page 44 Wednesday, March 2, 2005 1:13 PM