Sony KDP 51WS655 - Manual (Page 57)

56
SETU
P
SETU
P
S
E
TU
P
Feat
ur
es
S
E
TU
P
SETU
P
Watching TV
To Do This ... Do This ...
Activate the remote control to
operate the TV Press TV FUNCTION
Turn on/off the TV Press TV POWER
Tune directly to a channel To tune to analog channels, press 0-9 and
then ENT .
For digital subchannels, press 0-9 , ,
press 0-9 again, and then ENT.
For example, to select subchannel 21.13,
press
2 + 1 + + 1 + 3 , and then press ENT .
✍
You can also select channels using the
program guide. See pages 57 for
details.
Adjust the volume Press VOL +/-
Mute the sound Press MUTING (to unmute, press MUTING
again or VOL + )
Alternate back and forth
between two channels Press JUMP
The TV alternates between the current
channel and the last channel tuned.
Display the current channel
number, current time, current
Wide Mode, and program
information banner (if set) Press DISPLAY . Press DISPLAY again to turn
the display off.
Switch the TV’s input to the
VCR, DVD player, or other
connected equipment Press TV/VIDEO repeatedly to cycle through
the video equipment connected to the
TV’s video inputs.
Change video and audio
options, customize the TV’s
setup, set parental controls, and
more Press MENU to display the Menu. For
details, see “Using the Menus” on
page 83.
Switch the TV’s input between
sources connected to the TV’s
VHF/UHF and CABLE inputs
Press ANT to alternate between sources
connected to the TV’s VHF/UHF and
CABLE inputs.
For a complete list of all
the functions of the remote
control, see pages 47-53.
z
AX1X_Digital.book Page 56 Wednesday, March 2, 2005 1:13 PM