Sony KDP 51WS655 - Manual (Page 47)

46
SETU
P
SETU
P
S
E
TU
P
SETU
P
Set
up
SETU
P
Notes on Adjusting
the Convergence
Manually ❑ For best results, stand 3 to 5 feet away from the picture when
adjusting the convergence. Begin with the crosses in the center
area of the screen and, once those are adjusted, move to the
crosses on the edges of the screen.
❑ You can make separate adjustments in the each of the
following viewing modes:
❑ For standard-definition (480i/480p) sources: Wide Zoom ,
Normal / Full , and Zoom modes (see page 59).
❑ For high-definition (720p/1080i) sources: Full , Wide Zoom ,
and Zoom modes (see page 60); in Twin View (see page 61).
In each of these viewing modes, the cross pattern looks
different, but the adjustment procedure is the same.
❑ To optimize the conditions for convergence adjustment, in the
Video Menu, set
Mode to Pro or Movie and lower the Picture level
settings (see page 84).
❑ You can reset the adjustments by pressing the RESET button on
the remote control.
AX1X_Digital.book Page 46 Wednesday, March 2, 2005 1:13 PM