Removing the cablecard – Sony KDP 51WS655 User Manual

Page 43

Advertising
background image

42

SETU

P

SETU

P

S

E

TU

P

SETU

P

Set

up

SETU

P

3

Gently push the card into the slot until it locks into place.

4

Turn on the TV. After 1-2 minutes, the CableCARD setup screen is
displayed. This screen includes information your cable TV
company will request before they can activate your service.

5

Follow the displayed instructions: Phone your cable company. A
representative will guide you through the activation process.

6

After your CableCARD is activated, your cable TV company will
download the service information, including the channel list, to
the CableCARD.
After the CableCARD has acquired channels from your cable TV
company, the TV tunes to the lowest available channel.

Removing the
CableCARD

In the event you want to cancel your service, contact your cable TV
company.

1

Turn off the TV.

2

Push the eject button on the TV’s CableCARD slot to release the
card.

3

Pull the CableCARD straight out of the slot to remove it.

To set up your normal cable channels, run Auto Program from the
TV’s Channel Menu (see page 89).

To install a different CableCARD, follow the instructions in
“Activating CableCARD Service” on page 41.

You can also access

information about your
CableCARD in the Applications
Menu (see page 98).

z

Once the CableCARD is removed, your TV will no longer decrypt digital
cable TV programming services that require CableCARD.

Eject button

AX1X_Digital.book Page 42 Wednesday, March 2, 2005 1:13 PM

Advertising
This manual is related to the following products: