Sony PEGA-VR100K - Manual (Page 14)

14
Hookup 1: Connecting the antenna only
Use this hookup to connect a VHF/UHF antenna (or separate VHF and
UHF antennas) to the video recorder.
Use an antenna cable to connect the signal source coming
from your wall to the VHF/UHF IN jack on the Video
Recorder.
Notes
• If your antenna is a flat cable (300-ohm twin lead cable), use an external antenna
connector (not supplied) to connect the antenna to the Video Recorder.
• If you have separate cables for VHF and UHF antennas, use a VHF/UHF band mixer
(not supplied) to connect the antenna to the Video Recorder.
Hookup 2: Connecting to a TV or VCR
Use this hookup if the signal source coming from your wall is already
connected to your TV/VCR via a single antenna socket.
1
Use an antenna cable (not supplied) to connect the signal
source coming from your wall to the single (input) jack of the
splitter (not supplied).
2
Use an antenna cable (not supplied) to connect one of the
splitter’s two output jacks to the VHF/UHF IN jack on your
TV or VCR.
Signal source
Video Recorder
Wall
Antenna cable (supplied)
To VHF/UHF IN