Sony PEGA-VR100K - Manual (Page 46)

46
Self-diagnosis Function
(When letters/numbers appear in the display)
When the self-diagnosis function is activated to prevent the recorder from
malfunctioning, a combination of a letter and two numbers, or the
“Memory Stick” media status symbol appears in the front panel display. In
this case, refer to the following table. If an error number other than in the
following list appears, contact Sony Customer Information Services Center.
Three characters Remedy
of the service
number
E-00
E-10
E-11
E-12
E-13
E-20
E-22
E-23
E-32
E-33
Hardware does not work normally.
c Turn the Video Recorder off and turn it on again. If the error
message still appears, reset the Video Recorder (press the Reset
button).
The inserted “Memory Stick” media is not compatible with this
Video Recorder, or it is broken.
c Reformat or insert a new “Memory Stick” media.
There is lack of storage space to record on the “Memory Stick”
media.
c Delete unnecessary files on the “Memory Stick” media.
The file system in the “Memory Stick” media is not recognized.
c Remove the “Memory Stick” media and reinsert. If the error
message still appears, format the “Memory Stick” media using
CLIE Files .
The “Memory Stick” media is write protected.
c Release the write protect tab of the “Memory Stick” media.
Cannot read the timer REC preset file.
c Remove the “Memory Stick” media and reinsert it. If the error
message still appears, insert a new “Memory Stick” media.
Recording time is wrong.
c Check the preset time you set in
Video Utility . If the time you
set doesn’t coincide with the length of recording time, set the
timer REC preset again.
Cannot read the setting file on a “Memory Stick” media.
c Check the preset time with
Video Utility , and set the timer REC
preset again.
Cannot record (internal error)
The program you want to record contains a copy protection signal
that restricts copying.
c Check if the program contains a copy protection signal or not.