SMC Networks SMC7804WBRA - Manual (Page 64)

A
DVANCED
S
ETUP
4-21
ATM
Enter ATM (Asynchronous Transfer Mode) function parameters here.
Idle Time (Minute) Enter the maximum idle time for the Internet connection.
After this time has been exceeded the connection will be
terminated.
ISP Name Choose the ISP to whom this connection will apply.
Parameter Description
Protocol • Disable: Disables the ATM mode.
• 1483 Bridging: Bridging is a standardized layer 2
technology. It is typically used in corporate networks to
extend the physical reach of a single LAN segment and
increase the number of stations on a LAN without
compromising performance. Bridged data is encapsulated
using the RFC1483 protocol to enable data transport.
IP Address IP address of the ATM interface.
Subnet Mask Subnet mask of the ATM interface.
Default Gateway Default gateway of the ATM interface.
VPI/VCI
Each connection must have a unique pair of VPI/VCI settings.
Parameter Description