Sharp PG-MB60X - Manual (Page 50)

-46
Picture Adjustment (“Picture” menu)
sRGB Setting
When you want to display the image in a natural
tint based on an original image from the com-
puter, select “sRGB” and set it to “
” (ON).
Menu operation Page 42
Example: “Picture” screen menu for IN-
PUT 1 (RGB) mode
Note
• An international standard of color reproduction
regulated by the IEC (International Electrotechnical
Commission). As the fixed color area has been
decided by the IEC, the images are displayed in a
natural tint based on an original image, when
“sRGB” is set to “
” (ON).
• You cannot set the items, “Red”, “Blue”, “CLR
Temp”, “Bright Boost” on the “Picture” menu,
when “sRGB” is set to “
” (ON).
• For additional information about the sRGB func-
tion, visit “http://www.srgb.com/”.
Info
• When “sRGB” is set to “ ” (ON), the projected
image may become dark, but this does not indi-
cate a malfunction.
Signal Type Setting
This function allows you to select the input sig-
nal type RGB or Component for INPUT 1 or IN-
PUT 2.
Menu operation Page 42
Example: “Picture” screen menu for IN-
PUT 1 (RGB) mode
Description of Signal Type Settings
Description
Input signals are automatically recog-
nized as RGB or Component.
Set when RGB signals are received.
Set when Component signals are
received.
Selectable items
Auto
RGB
Component