Sony DMX-WL1 - Manual (Page 13)

Us
ing th
e Se
tup M
e
nu
13
Using the Setup Menu
Use the Setup menu to change the Language or IR Blaster settings.
Setup Description
Set up the IR Blaster to control external equipment connected to the transmitter unit with the supplied
remote control. For details, see the supplied Startup Guide.
1 Press SETUP to display the Setup menu.
2 Press V/v/B/b to highlight an item, and press to confirm.
3 Press SETUP to exit.
IR Blaster
Category Select the category from Cable Box, Satellite, VCR, DVD, BD or Receiver.
Maker Select the manufacturer of your equipment from the list.
Select Enter code... to enter codes for equipment not listed (for code list, see page 15).
Code Select the code from the list (see page 15).
~
• For Sony products, most of the codes appear as text.
Test (Power On/Off) Check that the code is correct by powering on or off the equipment attached to the selected
input.
~
• If the equipment’s supplied remote control has both a POWER ON and a POWER OFF
button, the Test Power (On/Off) function might not work to test the IR code.
Select Save and Exit, then test if any other remote buttons will operate your
equipment.
Save and Exit Save the setting and exit the Setup menu.
REC
CONNECT SETUP
TOP MENU MENU F1 F2 BD/DVD
REC PAUSE
MUTING JUMP
REC STOP
DISPLAY
WIDE PICTURE CC
MENU
FREEZE
1
4
7
2
5
8
0
3
6
9
ENT
VOL CH
WIRELESS LINK
AV POWER TV POWER POWER
COMPO- NENT
IN 5
IN 1 IN 2 IN 3 IN 4
TV
HDMI
SETUP
S e t u p / I R B l a s t e r / H D M I 1
C a t e g o r y
M a k e r
C o d e
Te s t ( P o w e r O n / O f f )
S a v e a n d E x i t
B D
S o n y
B D 1