Sony DMX-WL1 - Manual (Page 7)

7
Ov
er
vie
w
Overview of the Button, Parts and Indicators
Receiver Unit
POWER
1
Front side
Item Description
1 POWER / POWER
LED
Press to turn the receiver unit on and off, if Control for HDMI of the TV is Off.
Lights up green when the receiver unit is turned on.
~
• If POWER LED of the receiver unit does not light up, confirm Control for HDMI
setting of the TV is On.
• The power of the receiver unit turns on or off in conjunction with TV, if Control for
HDMI setting of the TV is On and the unit is connected to the TV by HDMI cable.
• When Control for HDMI is enabled on your TV, the power of the receiver unit will
follow the power state of the TV. When the TV is turned on or off, the receiver unit will
also turn on or off. To manually control the power of the receiver unit using the
receiver’s POWER button, you must turn off the TV’s Control for HDMI.
• If Control for HDMI of the TV is Off, you must turn the power of the receiver unit on
or off by pressing the POWER button on the unit.
• The supplied remote control cannot be used to turn on or off the receiver unit separately
from the TV.
2 DC IN 9V Connects to the supplied AC power adapter with AC cord.
3 HDMI OUT Connects to any HDMI input on the TV.
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital
audio/video interface between the receiver unit and the TV.
~
• Be sure to use only an HDMI cable that bears the HDMI logo.
4/5 SERVICE These jacks are for service only.
SERVICE SERVICE
DC IN 9V
OUT
2 3 4 5
Rear side