Sony 3-289-204-12(1) User Manual

Page 10

Advertising
background image

10

US

D:\SONY HA\3289204121\01US-STRDA2400ESUC\030CON.fm

masterpage: Left

STR-DA2400ES
3-289-204-12(1)

Name

Function

A AV ?/1

(on/standby)

Press to turn on or off the audio/
video components that the
remote is programmed to
operate.
To turn the TV on or off, press
TV (X) and then press AV
?/1.
If you press ?/1 (B) at the
same time, it will turn off the
receiver and other components
(SYSTEM STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
buttons (D).

B ?/1

(on/standby)

Press to turn the receiver on or
set it to standby mode.
To turn off all components,
press ?/1 and AV ?/1 (A) at
the same time (SYSTEM
STANDBY).

Saving the power in standby
mode.
When “Control for HDMI”
(page 89) and “RS-232C
Control” (page 58) is set to
“OFF”.

C AMP

Press to enable the receiver
operation (page 106).

D Input

buttons

Press one of the buttons to
select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
factory assigned to control Sony
components (page 50). You can
program the remote to control
non-Sony components
following the steps in
“Programming the remote” on
page 120.

Numeric
buttons
(number 5

a)

)

Press SHIFT (W) and then
press numeric buttons to
– preset/tune to preset stations.
– select track numbers of the

CD player, VCD player, LD
player, DVD player, MD
deck, DAT deck, or tape
deck. Press 0/10 to select
track number 10.

– select channel numbers of

the VCR, satellite tuner, Blu-
ray disc player, PSX, DVD/
VHS COMBO, or DVD/
HDD COMBO.

Press TV (X), and then press
the numeric buttons to select the
TV channels.

ENT/MEM

Press SHIFT (W) and then
press ENT/MEM to
– enter the value after selecting

a channel, disc or track using
the numeric buttons of the
VCR, CD player, VCD
player, LD player, MD deck,
DAT deck, tape deck,
satellite tuner, Blu-ray disc
player, or PSX.

– store a station during tuner

operation.

To enter the value of Sony TV,
press TV (X) and then press
ENT/MEM.

CLEAR

Press SHIFT (W) and then
press CLEAR to
– clear a mistake when you

press the incorrect numeric
button of the DVD player,
Blu-ray disc player, PSX,
satellite tuner, DVD/VHS
COMBO, or DVD/HDD
COMBO.

– return to continuous

playback, etc. of the satellite
tuner or DVD player.

-/--

Press SHIFT (W) and then
press -/-- to select the channel
entry mode, either one or two
digit of the VCR or satellite
tuner.
To select the channel entry
mode of the TV, press TV (X)
and then press -/--.

Name

Function

Advertising
This manual is related to the following products: