Star Micronics SP300 Series User Manual
Page 49
– 45 –
FUNCTION
Select vertical expaned character mode
CODE
<ESC> “h” “1” or <ESC> “h” <1>
(1B)
H
(68)
H
(31)
H
or (1B)
H
(68)
H
(01)
H
OUTLINE
Prints characters two times the normal vertical size after the
code is received.
However, the bit image mode <ESC> “K” and <ESC> “L”
are excluded.
NOTE
(1) When combined with the <SO> code, this code enables
printing of the characters in two times the normal vertical
and horizontal size.
(2) This code is not combined with the inverted print mode
<SI> code.
(3) For the 6
×
12 dots IBM block graphic (the characters
code table (B0)
H
-(DF)
H
and (F4)
H
-(F5)
H
of IBM charac-
ter set #1 and #2) of the font construction, vertical
enlargement is not available.
(4) The relationship of the vertically enlarged character and
the normal character is matched at the lower level.
(5) Feed the paper a minimum of one line before printing
with this code.
FUNCTION
Cancel vertical expanded character mode
CODE
<ESC> “h” “0” or <ESC> “h” <0>
(1B)
H
(68)
H
(30)
H
or (1B)
H
(68)
H
(00)
H
OUTLINE
Cancels vertical expanded character mode