Sennheiser Evolution SKM 300 - Manual (Page 14)

13
Using the radio microphone
To switch the radio microphone off :
̈
If necessary, deactivate the lock mode (see next
section).
To switch the radio microphone on and to deactivate the
RF signal on switch-on (offline operation):
To activate the RF signal :
You can switch the radio microphone on and
deactivate the RF signal on switch-on . For more
information, see next section.
̈
Press the ON / OFF button
Ƹ
until “ OFF ” appears
on the display panel. The red ON LED
µ
and the
MIC button
»
go off. The display panel turns off.
When in the operating menu, pressing the ON /
OFF button
Ƹ
cancel your entry (ESC function) and
return you to the current standard display.
̈
Keep the ON / OFF button pressed until “ RF Mute
On? ” appears on the display panel.
̈
Press the multi-function switch.
The transmission frequency is displayed but the
radio microphone does not transmit an RF signal.
The transmission icon
ብ
is not displayed.
The MIC button
»
goes off. When the pilot tone
function is activated on both radio microphone
and receiver, “
RF Mute ” appears on the receiver’s
display panel.
Use this function to save battery power or to
prepare a radio microphone for use during live oper-
ation without causing interference to existing trans-
mission links.
̈
Briefly press the ON / OFF button
Ƹ
.
“ RF Mute Off? ” appears on the display panel.
̈
Press the multi-function switch.
The transmission icon
ብ
is displayed again.
ON/OFF
ON/OFF
MHz 531.375
ew300 G3
MUTE P
AF
ብ
ON/OFF