Sharp AR-507 - Manual (Page 82)

4-2
CHAPTER
4
PAPER
Types and sizes of copy paper
Size Weight Capacity Special paper
(80 g /m 2 (21lb.)
paper)
Paper trays A5 to A3 56 to 105 g /m 2 500 sheets
1 and 2 (5-1/2" x 8-1/2" (15 lbs. to 28 lbs.)
to 11" x 17")
Bypass tray Face up A6 to A3 52 to 128 g /m 2 50 sheets Transparency film,
delivery (5-1/2" x 8-1/2" (14 lbs. to 34 lbs.)* labels, tracing paper,
to 11" x 17") (Ordinary paper) 176 g /m 2 (65 lb.)
paper**, 200 g /m 2
(110 lb.) paper**
Face down A5 to A3 56 to 105 g /m 2 50 sheets
delivery (8-1/2" x 11" (15 lbs. to 28 lbs.)
to 11" x 17")
● For best results, use only paper recommended by SHARP.
* For paper weighing from 105 to 128 g /m 2 (28 to 34 lbs.), A4 (8-1/2" x 11")
is the maximum size that can be fed through the bypass tray.
** Paper heavier than 128 g /m 2 (34 lbs.) must be fed narrow side into the
feed slot of the bypass tray.
★ ★ ★ ★ ★ KEY OPERATOR To enable face down delivery from the bypass tray,
paper type setting in the bypass tray must be enabled. See page 8-22.
Loading copy paper
“ OPEN TRAY AND ADD PAPER. ” will be displayed when there is
no copy paper in a selected paper feed station.
When a selected paper tray is not installed or is improperly installed,
“
PUSH PAPER TRAY INTO THE MACHINE UNTIL IT
LATCHES. ” will be displayed. Install it or push it back firmly into
place.
For best results, use only Sharp recommended paper.
SUPPLIES
Paper