Sharp AR-507 - Manual (Page 87)

4-7
CHAPTER
4
1 Open the toner collecting container cover.
● Push once on the door to unlatch and open it.
2 Disengage and remove the container from the copier.
● Toner cannot be reused. Do not transfer used toner to the toner
hopper.
● Remove the cap from a new toner collecting container and use
it to cover the full toner collecting container.
● Keep the full toner collecting container until the next regular
service call. Your authorised Sharp Service Technician will
collect the container for disposal.
3 Install a new toner collecting container until it clicks into
place.
4 Close the toner collecting container cover.
USED TONER DISPOSAL
“ REPLACE USED TONER CONTAINER. PRESS FOR GUIDANCE. ”
will appear when the toner collecting container is full.
The copier will stop and will not operate until a new container has been
installed. Replace the toner collecting container as described below.
When the above message is displayed, you can use the INFORMATION
(
) key for detailed information as necessary.
SUPPLIES
Used toner disposal
2
1