Star Micronics LC-6211 - Manual (Page 12)

6 Printer Setup
❏
Carefully place the cartridge onto the cartridge holder making sure that the
spindle of the holder fits into the socket on the bottom of the cartridge.
❏
Press down gently but firmly on the cartridge until it snaps securely into
place.
❏
Rotate the knob on the cartridge again to take up any slack.
❏
Close the front cover of the printer.
Important!
Printing that is poor quality or too light is almost always due to a ribbon that is
simply worn out or “used up.” If you experience problems with print quality,
check the condition of the ribbon. If the black part looks gray and well-worn,
replace the ribbon with a new one.
Removing the ribbon cartridge
Use the following procedure to remove the ribbon cartridge from the printer
when you want to replace it with a new one.
❏
Make sure that printer is unplugged from its power outlet.
❏
Open the front cover of the printer.