Star Micronics LC-6211 - Manual (Page 23)

Paper loading 17
Paper loading
❏
Prepare either cut-sheet or fanfold paper for feeding.
For details on how to prepare for paper feeding, see page 8 for fanfold paper
and page 27 for cut-sheet paper.
❏
The POWER indicator flashes to indicate there is no paper in the printer.
❏
Press SET/EJECT/PARK to feed the paper into the printer.
Line feed
❏
Make sure the printer is off-line ( ON LINE indicator is not lit).
❏
Press LINE FEED once to feed paper one line. Holding down LINE FEED
continually feeds paper, one line at a time, until you release the button.
Paper eject (cut-sheet paper)
❏
Make sure the printer is off-line ( ON LINE indicator is not lit).
❏
Press SET/EJECT/PARK to eject the paper.
❏
After the paper is ejected, the printer will beep and the POWER indicator
will flash to indicate there is no paper in the printer.
❏
Later, you can press SET/EJECT/PARK again to feed the paper back into
the printer.
Form feed (fanfold paper)
❏
Make sure the printer is off-line ( ON LINE indicator is not lit).
❏
While holding down LINE FEED , press ON LINE to feed the paper to the
top of the next page.