Sanyo CE32DFN2-B - Manual (Page 12)

12
REMOTE CONTROL REMOTE CONTROL - - Analogue Analogue
Screen mode selector
To select the screen mode, AUTO, NATURAL,
ZOOM14:9, TITLE IN 14:9, ZOOM 16:9,
TITLE-IN 16:9, FULL or NORMAL.
TV/AV switch
To switch from TV, AV1, AV2 or
AV3 mode press repeatedly.
Direct programme selector
For direct access to programmes
using (0-9) numeric buttons in analogue
and digital. For selection of analogue
programme position 10 - 99, for example 23,
first press -/-- button and press
2 and 3 numeric buttons.
OK
To save the setting in the menu.
(also refer to CS button).
MENU
To switch on the screen display menu on/off.
Also see page 12.
Nicam/Bilingual selector
To switch the sound mode as follows;
NICAM or MONO in the stereo programmes.
A or B in the bilingual programmes. If the
nicam or stereo sound reception is poor in
quality, you can switch to MONO sound
reception by pressing A•B button. This
operates only analogue channel mode.
INFO
In the analogue mode, it displays the programme
information such as current programme number,
stereo status and remaining time if set, for about
5 seconds.
Picture mode selector
To access a series of picture modes:
PERSONAL, STANDARD, ECO and
DYNAMIC.
Sound mute
To switch the sound from the speakers.
The sound changes as follows;
Normal volume -> Half volume -> Mute
Programme up and down
To select the next programme number or
previous programme number.
Channel mode selection
To enter channel number of the station
directly. This operates in the analogue
channel mode only. Press once to show
current channel number. Press a second
time to show C--, enter the channel you
require using the 0-9 buttons. Press the OK
button to memorise
Volume up/down
To adjust the sound level.
Bass selection
To get an emphasised bass sound ON or OFF.
Teletext/TV selector
To switch TV, MIX and Teletext mode.
Standby/Power on/off
To switch the TV on and off.
Also see page 16.
Cursors
To select the sub menu items in the
menu display.
Surround mode selector
To select the surround mode, ACTIVE,
MONO or OFF.
System selector
To select the colour system in the AV mode,
AUTO,PAL,NTSC 4.43 or NTSC3.58.
D/A selector
To switch between analogue and digital channels.