Sanyo CE32DFN2-B - Manual (Page 16)

16
■ Switching into /from standby mode
The Standby mode is used for switching the TV set off for short
periods of time. In standby mode the TV is switched off but is
still receiving mains power.
● To turn the TV set into standby mode, press the 4 4 button.
The red power indicator illuminates more brightly.
● To turn the TV set ON from standby mode, press any of the
following buttons:
4 4 , 5 5 , 6 6 or 0-9 buttons.
■ Auto shut off
This TV set will automatically switch into the standby mode, 10
minutes after a signal is no longer received. The time until the
set will switch off is displayed on the screen.
No signal. will
also appear in digital mode.
✐ When the TV set is switched on by using the ON-Timer function
with no signal being received, this function will be ignored.
■ Use of Audio Output Jacks
This TV provides the audio monitor output jacks on the rear of the
cabinet back. You can connect your audio equipment to these jacks
to give you sound through your audio equipment.
!
ANALOGUE ANALOGUE AND DIGIT AND DIGIT AL AL OPERA OPERA TION TION
If you find the power indicator flashing, please turn the TV
set off completely with the Mains ON/OFF switch and
contact our Service desk.
This warning is a sign to let you know that the power
protection function of this TV set is now operating.
!
AV1 AV2
ANT.75 Ω
To audio equipment