Sanyo CE32DFN2-B - Manual (Page 9)

9
● Edit channel list
1. Press Menu button to select Main Menu.
2. Select Channel List by using e e or d d buttons. Press 8 8 to
enter.
3. Select Lock channels by using e e or d d buttons. Press 8 8 to
enter.
4. To delete channels from this list use e e or d d buttons to highlight
a channel.
6. To lock or unlock parental locked channels, select the channel and
press the yellow button. This will lock or unlock the channel.
7. Press the OK button, selected channels will be locked / unlocked
and parental lock/unlock stored.
You will go back to Channel List menu.
● Scan for channels
1. Press Menu button to select Main Menu.
2. Select Channel List by using e e or d d buttons. Press 8 8 to
enter.
3. Press d d to select Scan for channels. Press 8 8 to enter.
This will scan all available channels. This is a useful function if you
delete channels and want to get them back later.
4. Press OK to save (All Channels).
5. Press OK again to watch normal TV picture.
✐ Parental lock is still saved after the scan for channels has been
initialised.
In this section a lot of the information will only be useful to a techni-
cian. Some parts are however useful to you. If there is an upgrade in
software you will need this section to upgrade your TV from time to
time.
1. Press Menu button to select Main Menu.
2. Select Technical Information menu by using e e or d d buttons.
Press 8 8 to enter.
3. Select Signal information by using e e or d d buttons and press
8 8 to enter.
This screen cannot be altered but if you have a problem you may
need to refer to this screen for some data.
4. Press Return or OK button to go back to Technical information
screen.
■ Software upgrade
1. Press d d button to select Software Upgrade screen. Press 8 8 to
enter.
This looks for any new software upgrades that maybe transmitted at
any time.
2. Press Return button to go back to Technical information screen.
3. Select Product Data by using e e or d d buttons and press 8 8 to
enter.
This is useful to service engineers.
4. Press Return button to go back to Technical information screen.
5. Press d d button to select Reset screen. Press 8 8 to enter.
If you press Red button to confirm it will return all settings to factory
(default) mode for digital channels. To start a scan for all available
channels switch the TV set Off and On again and press D/A button
to select digital.
When the TV set has been initialised press OK to Save and OK to
watch TV picture.
Channel List
Lock channels
Channel list
Scan for channels
Lock channels All channels
BBC ONE
BBC ONE
BBC TWO
ITV 1
Channel 4
five
ITV 2
BBC THREE
Teletext
BBC FOUR
Sky Travel
UK History
Ch 14
CH 15
QVC
TV Travel Shop 1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
OK Save Parental lock Y
Channels found
The scan will take approximately 3 minutes
In progress RET Stop
Scan for channels
0
DIGIT DIGIT AL AL OPERA OPERA TION TION
Technical Information
Signal information
Technical information
Software upgrade
Product data
Reset
BBC THREE (BBC)
Free
DVB Identifiers (9018,4103,4351)
Channel 63
Signal strength (%) 34
Bit error rate
Uncorrected errors/sec
OK Select RET Cancel
Signal information
Looking for new version.......
RET Cancel
Software upgrade
Reset receiver configuration?
RET Cancel
!
Confirm R
Product LDITPGFTG_01_00
Software 1.9.76 build jun 25 2003 16:10:15
Resourse 1.26.3
Boot 2.4.0
RET Cancel
Product data