Samsung SR8845 - Manual (Page 26)

26_ Operating the cleaner
Operating the cleaner
USING THE ROBOTIC VACUUM CLEANER
STARTING/STOPPING CLEANING
Turning the power on
- Remote control: Press the [Power] button.
- Main unit: Press the ( ) button.
- The main unit buttons, battery level indicator and
cleaning mode icons are turned on.
Turning the power off
- Remote control: Press the [Power] button.
- Main unit: Press and hold the ( ) button down for 3
seconds.
- All icons except for the battery level indicator are
turned off.
Starting
- Remote control: Press the Auto, Spot, Max, Manual
or Edge button.
- Main unit: Select Auto / Spot / Max / Manual / Edge
mode by using the ( ) button and then pressing
the ( ) button.
- When cleaning begins, the robotic vacuum cleaner
starts to move.
✽ Pressing the ( ) button without selecting cleaning
mode starts to perform the Auto mode cleaning.
Stopping
- To stop, press the ( ) remote control or main unit
button.
- When cleaning is stopped, the robotic vacuum
cleaner stops.
You can run or stop all robotic vacuum functions.
■
Each robotic vacuum function only runs when the Power
Switch is turned on.
■
When the robotic vacuum is operating, press the ( ) button
to cancel the operation and select a function.
Using the remote
control
Using the main unit
buttons
Turning the power on or off
Starting or stopping cleaning
DJ68-00518G(SR8845)(EN)-0.0.indd 26 2010.2.9 2:53:0 PM