Troubleshooting, Checklist before svc cals, Checklist before svc calls – Samsung SR8845 User Manual

Page 40

Advertising
background image

40_

Troubleshooting

Troubleshooting

CHECkLIST BEFORE SVC CALLS

SYMPTOM

CHECkLIST

MEASURE TO TAkE

Robotic vacuum

cleaner does not
operate at all

before
cleaning.

•

Is the dust bin assembled?

•

Install the dust bin.

•

Is the Power Switch turned on?

•

Turn on the Power Switch.

•

Is cleaning mode (

) in the

display panel turned on?

•

Press the ( ) button. (To turn it
off, press and hold the ( ) button

down for 3 seconds or longer.)

•

Is the battery level flashing only

one level and is ‘LO’ displayed in

the display panel?

•

Lift up the robotic vacuum

cleaner, and manually dock the

robotic vacuum onto the charger

to charge it.

•

Robotic vacuum cleaner will not

operate when the battery in the

remote control is depleted.

•

Replace the batteries in the

remote control. (AAA type)

Robotic vacuum

cleaner stopped
operating while

cleaning.

•

Is the battery level flashing only

one level and is ‘LO’ displayed in

the display panel?

•

Lift up the robotic vacuum

cleaner, manually dock the

robotic onto

the charger to charge it.

•

Has the robotic vacuum cleaner

become hooked on wires on the

floor?

•

Turn off the Power Switch and

remove the wires.

•

Is the robotic vacuum cleaner

stuck to the floor where there is a

height difference?

- The driving wheel is lifted.

•

Turn off the Power Switch and

move the cleaning robotic

vacuum to another place to

clean.

•

Is there a thin towel (cloth)

wrapped around the driving

wheel?

•

Turn off the Power Switch and

remove the thin towel.

•

Is the robotic vacuum cleaner

stuck on the doorsill?

•

Turn off the Power Switch and

move the robotic vacuum cleaner

to another place to clean.

The suction

power is weak
while cleaning.

•

Check whether the dust bin

is full of dust.

•

Stop the robotic vacuum cleaner

and empty the dust bin.

•

Check whether the suction

inlet is clogged by foreign

substances.

•

Turn off the Power Switch and

remove the foreign substances

on the suction inlet.

•

Check whether the Filter is

clogged.

•

Clean the Filter well.

DJ68-00518G(SR8845)(EN)-0.0.indd 40

2010.2.9 2:54:22 PM

Advertising