Connecting to a scart input jack, Connecting to a video input jack, Connecting to an s video input jack – Sony RDR-GX210 User Manual

Page 15: Connecting to component video input jacks (p

Advertising
background image

15

H

ook

up
s and

Se
tti

n

gs

A

Connecting to a SCART input jack

Connect using a SCART cord (not supplied) to the
LINE 1-TV jack and your TV. Be sure to make the
connections firmly to avoid hum and noise.
See the operating instructions supplied with the
TV to be connected. Set the VIDEO OUT
SELECT switch on the rear panel to “RGB.”

B

Connecting to a video input jack

Connect using the video cord (supplied) to the
yellow LINE 2 OUT (VIDEO) jack. You will
enjoy standard quality images.

C

Connecting to an S VIDEO input

jack

Connect using an S-video cord (not supplied) to
the LINE 2 OUT (S VIDEO) jack. You will enjoy
high quality images.

D

Connecting to component video

input jacks (P

B

/C

B

, P

R

/C

R

,

Y)

Connect the COMPONENT VIDEO OUT jacks
using a component video cord (not supplied) or
three video cords (not supplied) of the same kind
and length. You will enjoy accurate colour
reproduction and high quality images.
Set the VIDEO OUT SELECT switch on the rear
panel to “COMPONENT.”
If your TV accepts progressive 625p format
signals, you must use this connection and set
[Progressive Mode] in [Settings] Setup to [On]
(see page 73). The PROGRESSIVE indicator
lights up on the recorder.

When playing “wide screen” images

Some recorded images may not fit your TV
screen. To change the aspect ratio, see page 72.

If you are connecting to a VCR

Connect your VCR to the LINE 3/DECODER
jack on the recorder (page 23).

Notes

• Consumers should note that not all high definition

television sets are fully compatible with this product
and may cause artifacts to be displayed in the picture.
In the case of 625 progressive scan picture problems, it
is recommended that the user switch the connection to
the ‘standard definition’ output. If there are questions
regarding our TV set compatibility with this model
625p DVD recorder, please contact our customer
service centre.

• When you connect the recorder to your TV via the

SCART jacks, the TV’s input source is set to the
recorder automatically when you turn the recorder on.
If necessary, press TV/DVD on the remote to return the
input to the TV.

Green

Red

Blue

Green

Red

Blue

Advertising