Sony RDR-GX210 - Manual (Page 24)

24
Connecting to the LINE 2 IN or LINE 4 IN jacks
Connect a VCR or similar recording device to the LINE 2 IN or LINE 4 IN jacks of this recorder. If you
are connecting to the LINE 2 IN jacks and the equipment has an S-video jack, you can use an S-video
cord instead of a video cord.
z Hint
When the connected equipment outputs only monaural sound, use audio cords that distribute monaural sounds to left/
right channels (not supplied).
Notes
• Do not connect the yellow LINE IN (VIDEO) jack when using an S-video cord.
• Do not connect the output jack of this recorder to another equipment’s input jack with the other equipment’s output
jack connected to the input jack of this recorder. Noise (feedback) may result.
• Do not connect more than one type of video cord between the recorder and your TV at the same time.
OUTPUT
S VIDEO AUDIO
L R
VIDEO
AERIAL
IN
OUT
LINE 3 / DECODER DIGITAL OUT
LINE 1 - TV
COAXIAL
PCM/DTS/ MPEG/ DOLBY DIGITAL
PCM/DTS/MPEG/
DOLBY DIGITAL
COMPONENT VIDEO OUT
P B /C B
P R /C R
Y
LINE 2 OUT
L AUDIO
VIDEO
R
LINE 4 IN
L AUDIO
VIDEO
R
S VIDEO
LINE 2 OUT DIGITAL OUT VIDEO OUT SELECT RGB
COMPO- NENT
OPTICAL
VCR, etc.
Audio cord
(not
supplied) S-video cord
(not supplied)
to LINE 2 IN DVD recorder (front)
: Signal flow
(rear)
to LINE 4 IN
VCR, etc.
Video cord
(not supplied)