Scag Power Equipment SWZV - Manual (Page 32)

28
Section 7
+ Compatible Greases: Mobilix #2 found at Mobil Service Stations
Timken Lithium Multi-Use #2 found at industrial shops
Shell Alvania #2 found at Shell Service Stations
Lidok EP #2 found at industrial shops
MAINTENANCE CHART - RECOMMENDED SERVICE INTERVALS (CONT'D)
HOURS
Break-In 8 40 100 200 500 Procedure Comments
(First 10)
X Apply grease to fittings See paragraph 7.2
X Check hardware for tightness
X Change engine oil filter See paragraph 7.4
X Check hydraulic oil level See paragraph 7.3
X Replace engine fuel filter See paragraph 7.5
X Drain hydraulic system and See paragraph 7.3
replace hydraulic oil Use SAE 20W50
Oil
X Replace hydraulic oil filter See paragraph 7.3
7.2 LUBRICATION - GREASE FITTING LUBRICATION CHART
(SEE FIGURE 7-1, PAGE 27)
LUBRICATION NO. OF
LOCATION INTERVAL LUBRICANT PLACES
1 Caster Wheel Pivot 100 Hours/Bi-Weekly Chassis Grease 2
2 Caster Wheel Bearings 100 Hours/Bi-Weekly Chassis Grease 2
3 Brake Actuator 200 Hours/Monthly Chassis Grease 2
4 Cutter Deck Spindle 40 Hours/Weekly +Lithium MP White Grease 2125 2/3
5 Cutter Deck Pusharms 100 Hours/Bi-Weekly Chassis Grease 2