Sony ICD-ST20 - Manual (Page 30)

30 GB
Adjusting the Playback Speed — DPC (Digital Pitch
Control) (Continued)
Setting the playback speed
You can set the playback speed when the DPC switch is set to ON. The
setting for the playback speed holds effective until you change the setting.
1
Turn the jog lever toward MENU
to display the menu mode.
2
Press the jog lever up or down
(>/.) to select “DPC”, then
press the jog lever (x•B).
The playback speed setting mode
will be displayed. The flashing
number represents the playback
speed in percentage with the
standard speed as “0”.
3
Press the jog lever up or down
(>/.) to set the playback
speed.
• Fast play (up to +100% by 10%):
Press up (>).
• Slow play (down to –50% by 5%):
Press down (.).
4
Press the job lever (x•B).
The specified playback speed is
confirmed.
5
Press the jog lever toward
MENU to exit the menu mode.
The normal display appears.