Sony ICD-ST20 - Manual (Page 36)

36 GB
Erasing Messages (Continued)
1
Press ERASE while playing back the
message you want to erase or press
ERASE for more than 1 second during
stop mode.
The message number and “ERASE”
will flash while the first and last 5
seconds of the message are played
back 10 times.
2
Press ERASE while the message is being played back and
“ERASE” is flashing.
The message is erased and the
remaining messages will be
renumbered. (For example, if you
erase Message 3, Message 4 will be
renumbered as Message 3. When
erasing is completed, the unit will
stop at the beginning of the following
message.)
To cancel erasing
Press xSTOP before step 2.
To erase other messages
Repeat steps 1 and 2.
To erase a message partially
First divide the message (see page 38) and then follow the steps on this
page to erase the message.