Sharp FODC525 - Manual (Page 48)

Sending a Fax by Automatic Dialing
46
Rapid Key Dialing
If the number you want to dial has been programmed in a Rapid Key, you can
dial it by pressing the Rapid Key.
1
Load the document(s).
SEND READY will appear in the
display.
•
Press and/or to
set the resolution and contrast if
needed.
•
To send the document ahead of other
documents waiting for transmission,
press .
•
To send the document directly from the
feeder (not through memory), press
. (Flip up the Rapid Key overlay
if it is down.)
2
Press the appropriate Rapid Key.
•
The name of the receiving party will appear in the display. (If the destination
is not correct, press .)
•
The document will be automatically transmitted once the connection is
established.
RESOLUTION CONTRAST
PRIORITY
DOCUMENT
M/?
STOP
all.book Page 46 Thursday, May 13, 2004 8:51 AM