Sharp FODC525 - Manual (Page 81)

Printing out the Network Settings
79
3. Netw
or
k
Scanner
1
Press and then or
until NETWORK SETTING is selected in
the display.
2
Press and then .
•
Make sure that NETWORK SETTING
LIST is selected.
3
Press .
4
Press or to select the list that you wish to print, and then
press . (Note: “NIC” is an acronym for “network interface board”.)
MENU
START/
ENTER
START/
ENTER
START/
ENTER
Display:
MENU MODE
5:PROGRAM/GROUP MODE
6:SERIAL POLLING MODE
7:MEMORY POLL MODE
8:NETWORK SETTING
NETWORK SETTING
1:NETWORK CONFIG SET
2:SCAN TO E-MAIL SET-UP
3:NETWORK SETTING LIST
NETWORK SETTING LIST
1:PRINT NETWORK SETTINGS
2:PRINT NIC INFORMATION
Printing out the Network Settings
You can print lists showing the current network settings and network interface
board settings.
♦
To check the IP address of the machine, select PRINT NETWORK
SETTINGS in Step 3 below.
all.book Page 79 Thursday, May 13, 2004 8:51 AM