Slant/Fin GF-211D - Manual (Page 4)

4
HOW YOUR
SLANT/FIN
WARM MIST
HUMIDIFIER WORKS
This model humidifier uses a
two-step approach to eliminate
potentially harmful microorgan-
isms from the water before they
are spread with the mist into
the air. The first step uses a
UV bulb, located inside the
base of the humidifier, that
shines on the water through a
special glass tube as it passes
from the cold water reservoir to
the hot water reservoir. The
second step is the boiling
action that takes place in the
hot water reservoir just before the mist is distributed by fan to the air in the room.
CONTROL PANEL
POWER/MODE
POWER/MODE touch
switch is pushed to either
“OFF”, “HI” or “LO” mode.
On “HI”, humidifier wil
operate on maximum
power. On “LO” humidifier
will operate more quietly on
reduced power. The mode
will be indicated in the “MODE” window of the digital readout.
POWER
“POWER” indicator will be lit to indicate that the POWER/MODE touch switch is
in either the “HI” or “LO” position. This indicator will not be lit when the
POWER/MODE touch switch is in the “OFF” position.
HUMIDITY
The digital display window above “HUMIDITY” displays the ambient relative
humidity as long as the humidifier is plugged into a “live” electrical outlet.
WEEKLY CLEANING AND MAINTENANCE ADVISORY
At least weekly cleaning is recommended, when the unit has been in use. Regular
cleaning prevents mineral scale buildup in the hot water reservoir. It also helps prevent
buildup of bacteria, molds or other micro-organisms in the tank or system. This ensures
that your humidifier will operate at maximum efficiency. (See page 7 for full cleaning
instructions.)
GF-211D Shown
GF-211D Shown
GF-211D_OM_EFS.qxd 6/20/06 11:29 AM Page 4