Sony PEGA-WL100 - Manual (Page 28)

28
15
Enter an IP address and a sub-netmask.
Enter different IP addresses in your CLIÉ handheld and the other
communication device.
Enter the same Subnet mask in your CLIÉ handheld and the other
communication device.
(Eg.)
IP address
CLIÉ handheld: 192.168.0.1
Other device: 192.168.0.2
Subnet mask CLIÉ handheld/other device:
255.255.255.0
Tip
Enter a gateway address if necessary. When it is necessary to enter a DNS
address, tap and tick the checkbox of [Auto] in [DNS Address] before
entering the DNS address.
16
Tap [OK].
The [Wireless LAN Setup] screen appears.
17
Tap [OK].
The settings are completed in the profile name you set in Step 7.
18
Tap the Home icon on your CLIÉ handheld.
The home screen appears.
Note
User has to find the Subnet mask from the
PC that he/she wants to connect to. The
following is referred to find Subnet mask on
a PC.
Windows 98 and Windows ME:
From [Start]
c [Run...] c type in ‘winipcfg’ c
the [IP configuration] dialog box appears c
check the IP address and Subnet mask.
Windows 2000 and Windows XP:
From [Start]
c [Run...] c type in ‘cmd’ c type
‘ipconfig/all’ c check the IP address and
Subnet mask.