Sharp LL-E15G1 - Manual (Page 24)

24
Specifications
Signal timings
Notes:
-
All are compliant only with non-interlaced.
- Frequencies for Power Macintosh are reference values.
- If the monitor is receiving timing signals that are not compatible, [OUT OF TIMING] will appear. Follow
your computer's instruction manual to set the timing to be compatible with the monitor.
- If the monitor is not receiving any signal (synch signal), [NO SIGNAL] will appear.
The connector pin
Display mode Hsync Vsync Dot frequency
31.5kHz 60Hz 25.175MHz
640x480 37.9kHz 72Hz 31.5MHz
37.5kHz 75Hz 31.5MHz
VESA 35.1kHz 56Hz 36.0MHz
800x600
37.9kHz 60Hz 40.0MHz
48.1kHz 72Hz 50.0MHz
46.9kHz 75Hz 49.5MHz
48.4kHz 60Hz 65.0MHz
1024x768 56.5kHz 70Hz 75.0MHz
60.0kHz 75Hz 78.75MHz
US text 720x400 31.5kHz 70Hz 28.3MHz
Power Macintosh 640x480 35.0kHz 66.7Hz 30.2MHz
series 832x624 49.7kHz 74.6Hz 57.3MHz
1024x768 60.2kHz 75Hz 80.0MHz
5 1 2 3 4
10 6 7 8 9
15 11 12 13 14
Mini D-sub connector with 15 pins
Number Function
1 Red video signal input
2 Green video signal input
3 Blue video signal input
4 GND
5 GND
6 For red video signal GND
7 For green video signal GND
8 For blue video signal GND
9 + 5V
10 GND
11 N.C.
12 DDC data
13 For H-sync signal input
14 For V-sync signal input
15 DDC clock