Sub-Zero 315W User Manual
Page 10
Dimensions in parentheses are in
millimeters unless otherwise specified.
10
S U B - Z E R O
M O D E L 3 1 5 W
I N S T A L L A T I O N
Inspect the door panel for the minimum
5
/
8
"
(16) thickness, the finished inside edge and the
10 lbs (5 kg) weight limit. See the Wine
Storage section of the Sub-Zero Design Guide
for additional panel information. Check our
website at subzero.com.
Decide if the handle will be attached through
the glass door frame or just through the deco-
rative door panel. If it is just through the door
panel, the handle must be attached first.
If you choose not to use the pre-drilled handle
mounting holes, it will be necessary to fasten
the handle from the rear of the door panel
only, or drill one or more additional holes
through the metal frame of the glass door.
29
15
/
16
"
(760)
25
15
/
16
"
(859)
14
3
/
4
"
(375)
FRONT VIEW
10
3
/
4
"
(273)
P A N E L
D E S I G N
Additional panel
design information
can be found in
the Sub-Zero
Design Guide.
Check our website
at subzero.com.
A solid panel must not be installed on a
glass door unit, as this may cause
moisture to form behind the panel.
OV E R L AY
P A N E L S
O V E R L AY P A N E L S P E C I F I C A T I O N S
Door Panel Width –
1
/
8
" (3) reveal*
15" (381)
Door Panel Height –
7
/
16
" (11) reveal**
4" (102) toe space
30
1
/
16
" (764)
Width of Rails and Stiles
2
1
/
4
" (57) min
Door Panel Thickness
5
/
8
" (16) min
Door Panel Weight
10 lbs (4.5 kg) max
Dimensions may vary +
_
1
/
8
" (3).
*
1
/
8
" reveal is required if two units are placed side
by side.
**
7
/
16
" (11) reveal from top of door panel to top of
hinge.
O V E R L AY D O O R D I M E N S I O N S
Overlay unit shown