Siemens gigaset SE551 - Manual (Page 111)

109
Configuring the Advanced Settings
Gigaset SE551 WLAN dsl/cable / deutsch / A31008-M1029-B101-1-19 / configure_router.fm / 25.10.2006
Sc
hablone 2
004_
12_2
7
USB
You can use your device's USB port to share a USB bulk memory or a USB printer with
users in your local network and publish your data on the Internet.
ì
In the Advanced Settings menu, select USB.
ì
Activate the USB port on your device.
If a USB device is connected, its Status is displayed.
Safely Remove Hardware
ì
Click on this button and wait until any connected USB bulk memory or USB printer
is fully deactivated before disconnecting them from your device.
ì
Click on OK to save the changes.
Note:
Generally speaking only devices that support USB V2.0 may be connected. However,
some devices with the earlier standard USB V1.1 still work.
Note:
Depending on the status of the software in your device, it is possible that not all
USB functions will work exactly as described below. If necessary, check whether a
software upgrade is offered on the Internet.