Siemens gigaset SE551 - Manual (Page 45)

43
Configuring the local network
Gigaset SE551 WLAN dsl/cable / deutsch / A31008-M1029-B101-1-19 / configure_tcpip.fm / 25.10.2006
Sc
hablone 2
004_
12_2
7
Installing the TCP/IP protocol
The TCP/IP protocol ensures that the PCs in the network can communicate with each
other. You must install this Protocol first for the network adapter that establishes the
connection with the Gigaset SE551 WLAN dsl/cable.
ì
In the Network window, change from the Identification register to Configuration.
ì
In the Network window, check that there is a TCP/IP -> entry for your network card
or network adapter in the list of components. If, for example, you are using a Gigaset
PC Card 108 as the wireless network adapter, the list must contain the entry TCP/IP
> Siemens Gigaset PC Card 108
ì
If the entry does not exist, click on Add.
.
ì
Select Protocol as the network component type and click on Add.
ì
Under Manufacturers select Microsoft, and under Network protocols select TCP/
IP and click on OK to confirm.