Siemens gigaset SE551 - Manual (Page 127)

125
Administration and status information
Gigaset SE551 WLAN dsl/cable / deutsch / A31008-M1029-B101-1-19 / admin_router.fm / 25.10.2006
Sc
hablone 2
004_
12_2
7
System Log
The System Log is displayed in the Status – Device menu. It can give you important
information about the functioning of your device and possible problems. You can also
have this information transmitted automatically on a system log server.
ì
In the Administration menu, select System Log to make the settings for the log.
ì
Log level: Select how much information is to be contained in the system log. You
can choose between four levels:
– Critical: logs the most important information concerning possible problems in
the functioning of your device
– Debugging:complete and detailed information about all your device's functions
– Warning and Informational are intermediate levels.
ì
System log server
– Activate this function if you require automatic transmission of your device's sys-
tem log to a system log server in your local network.
– Server address:
Enter the IP address for the system log server.
– Server port:
Enter the port of the system log server that is to be used to transmit the system
log.
ì
Click on OK to save and apply the changes.