Sanyo Projector - Manual (Page 43)


ENGLISH
Setting up the projector
Item Description
Video delay control .... Sets the digital processing of the
image faster. (OFF, Low, Mid, High)
Closed caption ...... Sets the closed caption function.
Closed caption ....... Sets the closed caption mode. (OFF,
CC1, CC2, CC3, CC4)
Color ......................... Sets the color of the contents. (Color,
White)
Filter counter(h) ... Displays the filter counter. Reset the
time after replacement of the AMC
(Active Maintenance Cleaner) unit.
Click "Reset", a confirmation display
appears, and then click "OK", the time
will be reset.
* Do not reset the Filter counter
when the filters (the electrostatic pleated filter and electrostatic honeycomb fil-
ter) are not replaced.
Filter counter
remaining(%) ......... Displays the remaining time every 10% until the specified time comes.
Filter warning......... Sets the time to indicate the filter warning message on the screen. (OFF, 4000H,
8000H, 12000H, 16000H)
* When using the optional "Smoke Resistant Filter", the setting time will be OFF,
10H, 15H, 20H.
Auto cleaning timer ... Sets the interval time of the auto cleaning filter. (50H, 100H, 150H)
Freeze .......................... Sets the image to freeze mode. (ON, OFF)
Test pattern ............. Sets the preset image of the projector. (OFF, Color, Gradation1 - Gradation4, All
white, All black, Cross)
Factory default .... Sets all of the projector control items to the factory default setting except the fol-
lowing items.
User Logo, Logo PIN code lock, PIN code lock, Lamp Corres. Value, Filter counter, PJ
time, Network PIN code, Network setting
* This function is not effective for the settings of Network address settings, e-mail
settings, etc.
Setting 4