Sony HVR-M25P User Manual
Page 17
Chapter 1
Overview
17
Chapter 1 Overview
1
HDV indicator
4 Indicator section
2
DVCAM indicator
3
60 indicator
4
50 indicator
5
HDV-i.LINK indicator
6
DVCAM-i.LINK indicator
7
DV-i.LINK indicator
1
HDV indicator
Lights when the unit is in the following operating
status.
• When a tape recorded in HDV format is being played
back.
• When HDV signals are input through the i.LINK
interface.
• When [HDV/DV SEL] in [IN/OUT REC] menu is set
to [HDV].*
* Even when [HDV/DV SEL] in [IN/OUT REC] menu is
set to [AUTO] with no signal input, while the last signal
input was HDV format or the last tape played was HDV
format, this indicator lights.
2
DVCAM indicator
Lights when the unit is in the following operating
status.
• When a tape recorded in DVCAM format is being
played back.
• When [HDV/DV SEL] in [IN/OUT REC] menu is
set to [DV] and [
REC MODE] in [IN/OUT REC]
menu is set to [DVCAM] (during recording or in EE
mode).*
* Neither HDV indicator nor DVCAM indicator lights
during recording in DV (SP) format or a playback of a
tape recorded in DV (SP) format.
3
60 indicator
Lights when the unit is in the following operating
status.
• During recording or in EE mode when [60i/50i SEL]
in [OTHERS] menu is set to [60i].
• During HDV1080/60i or NTSC signals are input
from HDV/DV jack.
• A tape that has HDV1080/60i or NTSC signals is
being played back.
4
50 indicator
Lights when the unit is in the following operating
status.
• During recording or in EE mode when [60i/50i SEL]
in [OTHERS] menu is set to [50i].
• During HDV1080/50i, or PAL signals are input from
HDV/DV jack.
• A tape that has HDV1080/50i or PAL signals is being
played back.
5
HDV-i.LINK indicator
Lights when HDV signals are input/output through the
i.LINK interface.
6
DVCAM-i.LINK indicator
Lights when DVCAM signals are input/output through
the i.LINK interface.
7
DV-i.LINK indicator
Lights when DV signals are input/output through the
i.LINK interface.