Sony HVR-M25P - Manual (Page 72)

Chapter 5 Adjusting and Setting Through Menus
72
Chapter 5 Adjusting and Setting Through Menus
Icon/Menu Submenu Setting
DISPLAY
SET
MARKER
BURN
(page 42)
ALLSCAN
MODE
DATA CODE
(page 36)
LETTER SIZE
DATE
DISPLAY
TIME
DISPLAY
REMAINING
(page 26)
LCD BRIGHT
LCD COLOR
Selects whether to output MARKER BURN or not.
OFF : Does not output MARKER BURN.
ON : Outputs MARKER BURN.
Note
There are some limitations to output MARKER BURN. For details, see page 42.
Reduces the image on LCD panel to check the area surrounding the picture frame where
the monitors can not display.
OFF : Disables the ALLSCAN MODE.
ON : Enables the ALLSCAN MODE.
Notes
• ALLSCAN MODE is for HDV format only. ALLSCAN MODE does not activate when
DVCAM and DV(SP)-formatted tapes are played.
• If formats are mixed on a tape, the part where the format has changed on a tape cause
distortion of images.
• When [ON] is selected and the output level of COMPONENT OUT is set to 480i, 576i,
480p/480i, or 576p/576i, output images from S VIDEO OUT jack and VIDEO OUT jack
down converts to letter box. For details,
see page 85.
• Once the unit turns off, the setting of [ALLSCAN MODE] sets to [OFF] automatically.
• When you set [MARKER BURN] and [ALLSCAN MODE] in [DISPLAY SET] menu to [ON]
at the same time, the marker will not appear in the correct position on LCD monitor. This is
not a malfunction. The marker will be output correctly via each video jack.
Selects whether or not to display the data codes on the analog video output.
OFF : Does not display the data codes.
DATE: Displays the date and time when recorded.
CAMERA DATA: Displays the camera data.
Selects the letter size of the menu at the cursor.
NORMAL : Normal size
2 x : Double height size
Selects the date display in the search screen, the data code display, etc.
Y/M/D : Displays YY/MM/DD (year/month/day).
M/D/Y: Displays MM/DD/YY (month/day/year).
(Default setting for HVR-M25U/M25N.)
D/M/Y: Displays DD/MM/YY (day/month/year).
(Default setting for HVR-M25E/M25P.)
Selects the time display in the search screen, the data code display, etc.
12H : Displays 12-hour time. (Default setting for 60i as the factory setting.)
24H : Displays 24-hour time. (Default setting for 50i as the factory setting.)
AUTO : The remaining tape time is displayed for 8 seconds under the following
conditions.
– If the remaining tape time is determined when you turn on power while
a cassette is loaded in the unit.
– When you press PLAY button.
Always displays under the following conditions.
– Fast forward, rewind
– Fast forward during playback, rewind during playback
ON : Always displays the remaining tape time.
Adjusts LCD monitor brightness. Press J/j buttons and EXEC button to adjust the
brightness. (The mark under the bar is the factory setting value.)
Adjusts the color density of LCD monitor. Press J/j buttons and EXEC button to adjust the
brightness. (The mark under the bar is the factory setting value.)
Operating the Menus