Sony Trinitron KD-32DX40U - Manual (Page 9)

Basic Operation
Basic Operation 7
Overview of the remote control
VIDEO / TV /
DIGITAL
VIDEO button
Press to switch off your VCR or DVD
temporarily.
DIGITAL/ button
Press to switch between Digital or
analogue mode, or to return to normal TV
operation from Teletext.
Screen format button
Press repeatedly to change the screen
format.
0 - 9 buttons
When Media Selector is set to TV, press to
input the required channel number. For
double digit numbers, e.g. for programme
14, press 1 followed by 4.
Information /Reveal button
In TV Mode: In Digital mode, press to
display the INFO screen. In analogue
mode, press to reveal on screen
information such as channel number etc.
In Teletext Mode: Press to reveal
concealed information (e.g. answers to a
quiz). Press again to cancel.
Coloured buttons
These buttons are used for teletext and for
Digital menus. Please refer to the relevant
sections in this manual.
EPG button
In Digital mode, press this button to display
the Electronic Programme Guide.
Control pad
When in the TV menu system, use these
buttons to navigate through the options in
each display.
Note: You can only enter the TV menu
system if the Media Select button is set to
TV. When set to VCR or DVD the control
pad buttons operate the main functions of
your VCR or DVD.
MENU button
Press to enter the menu system of this TV.
Volume + and - buttons
Press to increase (+) or decrease (-) the
volume.
/ TV button
Press to switch off your TV temporarily. The
red standby mode indicator on the front of
the TV is lit. Press again to return to normal
operation.
Video Input /Hold button
In TV Mode: Press to select signals from
equipment connected to the TV sockets
(refer to ‘Connecting additional
equipment’).
In Teletext Mode: Press to hold the current
page. Press again to cancel.
Previous channel button
Press to return to the previous channel you
were watching (provided you watched it for
at least 5 seconds).
Note: If the Media Select button is set to
VCR, you can use this button to select
double digit programme numbers on your
VCR, e.g. press the
button then press 2
and 3 for 23.
Analogue Teletext button
In analogue mode, press to switch
analogue Teletext on or off.
REC button
When Media Select switch is set to VCR,
press this button to begin recording.
Media Select button VCR/TV/DVD
This remote control can operate not only
Sony DVDs and VCRs, but also those
made by other manufacturers. Press this
button to select which type of equipment
you want to use. A green light is lit
momentarily to show which one you have
selected.
Note: Before operating your VCR or DVD
you will need to enter the correct
configuration code. Please refer to the
‘Remote control configuration’ section of
this instruction manual.
PROG + and - buttons
In TV Mode: Press to display the next or
previous channel.
In Teletext Mode: Press to select the next
or previous Teletext page.
Mute button
Press to mute the TV sound. Press again to
restore the sound.
/
DX40 Pages 1-10.fm Page 7 Wednesday, August 22, 2001 12:06 PM