SMC Networks Barricade SMC7404BRA EU - Manual (Page 42)

S
YSTEM
S
ETTINGS
4-17
Password Settings
Use this page to restrict access based on a password. By default, there is no
password. For security you should assign one before exposing the
Barricade to the Internet.
Passwords can contain from 3–12 alphanumeric characters and are not
case sensitive.
Note: If your password is lost, or you cannot gain access to the user
interface, press the reset button (colored blue) on the rear panel
(holding it down for at least five seconds) to restore the factory
defaults. (Default is no password.)