Aiming, Problems, Beeper definitions – Symbol Technologies LS 3603 User Manual

Page 16: Programming the system, Aiming -8, Scan the entire symbol -8 hold at an angle -8

Advertising
background image

1-8

LS 3603 Product Reference Guide

Aiming

Scan the Entire Symbol

•

Your scan beam must cross every bar and space on the symbol.

•

The larger the symbol, the farther away you should hold the scanner.

•

Hold the scanner closer for symbols with bars that are close together.

•

A short, high tone beep indicates a good decode.

Hold at an Angle

Do not hold the scanner directly over the bar code. In this position, light can
bounce back into the scanner's exit window and prevent a successful decode.

Problems

See

What If...

on page 1-13.

Beeper Definitions

The beeper in the unit provides a variety of messages. See Beeper Indications
beginning on

page 2-19

Programming the System

An LS 3603 is programmed by scanning sequences of bar codes; consult
Chapter 2.

RIGHT

WRONG

012345

012345

Advertising