Sony DVP-NC685V - Manual (Page 22)

22
Connecting to a stereo amplifier (receiver) and 2 speakers/Connecting to
an MD deck or DAT deck
If the stereo amplifier (receiver) has audio input jacks L and R only, use . If the amplifier
(receiver) has a digital input jack, or when connecting to an MD deck or DAT deck, use .
In this case, you can also connect the player directly to the MD deck or DAT deck without using
your stereo amplifier (receiver).
z Hint
To realize better surround sound effects, make sure
that your listening position is in between your
speakers.
Note
Super Audio CD audio signals are not output from
the digital jack.
B
B-1
B-2
Y P R P B
COMPONENT VIDEO OUT
S VIDEO
OUT
1
2
LINE OUT
R L
AUDIO VIDEO
1
2
5.1CH OUTPUT
W O O F E R
L
R
FRONT REAR
C E N T E R
PCM/DTS/DOLBY DIGITAL
COAXIAL OPTICAL
DIGITAL OUT
B-2 B-1
PCM/DTS/DOLBY DIGITAL
COAXIAL OPTICAL
DIGITAL OUT
LINE OUT
R L
AUDIO VIDEO
1
2
CD/DVD player
or
Stereo amplifier (receiver)
MD deck/DAT deck
Front (L)
Front (R)
[Speakers]
(white)
(red)
(red) (white)
Coaxial digital
cord (not supplied) Stereo audio cord
(not supplied)
to audio input to coaxial or optical
digital input
Optical digital cord
(not supplied)
Remove jack cap
before connecting
or
to LINE OUT L/R (AUDIO) 1 or 2
to DIGITAL OUT
(COAXIAL or OPTICAL)
l : Signal flow