Sony DVP-NC685V - Manual (Page 23)

23
H
ook
up
s
Connecting to an AV amplifier (receiver) having a Dolby Surround (Pro
Logic) decoder and 3 to 6 speakers
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or multi-
channel audio (Dolby Digital) discs.
If your amplifier (receiver) has L and R audio input jacks only, use
. If your amplifier
(receiver) has a digital input jack, use .
z Hint
For correct speaker location, refer to the operating
instructions of the amplifier (receiver).
Notes
• When connecting 6 speakers, replace the
monaural rear speaker with a center speaker, 2
rear speakers and a subwoofer.
• Super Audio CD audio signals are not output from
the digital jack.
C
C-1
C-2
Y P R P B
COMPONENT VIDEO OUT
S VIDEO
OUT
1
2
LINE OUT
R L
AUDIO VIDEO
1
2
5.1CH OUTPUT
W O O F E R
L
R
FRONT REAR
C E N T E R
PCM/DTS/DOLBY DIGITAL
COAXIAL OPTICAL
DIGITAL OUT
C-2 C-1
PCM/DTS/DOLBY DIGITAL
COAXIAL OPTICAL
DIGITAL OUT
LINE OUT
R L
AUDIO VIDEO
1
2
CD/DVD player
or
Front (R) Front (L) Rear (R)
Subwoofer
l : Signal flow
Rear (L)
Amplifier (receiver) with Dolby
Surround decoder
Center Rear (mono)
Stereo
audio cord (not
supplied)
[Speakers]
Coaxial digital cord
(not supplied)
(red) (white)
to coaxial or optical digital
input
Optical digital cord
(not supplied)
Remove jack cap
before connecting
[Speakers]
or
to audio input
(white)
(red)
to LINE OUT L/R (AUDIO) 1 or 2
to DIGITAL OUT
(COAXIAL or OPTICAL)
c continued